Material Archives - Page 2 of 5

Grading Limits for Aggregates

The grading limit for single-sized aggregates: Percentage passing for single sized aggregates of nominal size(mm) 63 mm 40 mm 20

The workability requirements for various concrete placement is explained below: The prerequisites of concrete workability changes along with range of

Objective: To assess the Young’s Modulus E of wood and Modulus of Rupture by carrying out the bending test Equipment

Bituminous road Construction steps are explained below: 1. Planning of the current base course layer The current surface is set

Aim: To calculate the splitting tensile of concrete Theory: Tensile strength of concrete is the most fundamental and significant property

Objective: To ascertain the modulus of elasticity of concrete Sample: Concrete calendar 15 cm diameter and 30 cm long Process

Log houses started in Europe where they were hurriedly raised as chasing lodges. Stacked log homes today are intricate structures

PaperCrete is basically a sort of mechanical quality paper maché made with paper and cardboard, sand and Portland concrete. There

Manufacturing Mould: Moulds will be manufactured utilizing mellow steel plates and mild steel plots for hardening the plates. The shape

When the admixtures are compatible with the concrete, they should meet the following quality requirement: Characteristics of admixture: The data

If concrete is impervious, or in other words, its permeability is not high then acidic agents and corrosive agents cannot